Cuttable anchor sleeve for use in masonry.

Injection anchor sleeve, 1 m length FIS H L

The fischer injection anchor sleeve, 1 m length FIS H L, is the cost-effective system component for fixings in perforated brick masonry without approval. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS P Plus, FIS P, and FIS Green can be used with it. This cost-saving product is sold by the metre and can be cut to the required length. This increases flexibility and cost-effectiveness. The anchor sleeve is placed in the drill hole, cut to the desired length, and filled with injection mortar from the base of the anchor sleeve. When the threaded rod or internal threaded anchor is installed, the mortar is pressed through the grid structure and creates a form fit with the perforated brick. This directs the load into the building material.
Produkt varijanteDownload of image data

Produkt varijante

Filter
Filter
7 produkt varijanti
Drill diameter
Match
Fill quantity per sleeve
Amount
GTIN (EAN-Code)
Pregledano 7 od 7 verzija

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

cd-green-68947b75f9-pnxj5