Zykon panel anchors FZP II T PA

Produkt varijante

Atesti / izvješća testova

5 produkt varijanti

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 5 od 5 verzija

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Applications

For high aesthetical requirements:

The concealed fixing of thin façade panels on exterior and interior façade as well as reveal panels.

Building materials

Fibre cement
HPL panels
Thin panel materials (≥ 8 mm)

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-22/0669
DoP No. 0360

Functionality

Dry drilling in fibre cement.
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
Drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
Stress-free and geometrical inter-locking fixing.

Mounting Strip 1 Picture

1 / 4

ETA-approval
Min. panel thickness	8 mm
Embedment depth( h₁ )	5 mm
Total length( l )	18,5 mm
Installed anchor length( a )	7,5 mm
Remaining thread length( b )	11 mm
Thread( M )	M6
Cylindrical diameter( d₀ )	11 mm
Undercutdiameter( d₁ )	13,5 mm
Colour washer	orange
Seismic-Approval	C1 / C2
System	FZP System
Amount	250 pcs
GTIN (EAN-Code)	4048962362053

ETA-approval
Min. panel thickness	8 mm
Embedment depth( h₁ )	5 mm
Total length( l )	20,5 mm
Installed anchor length( a )	7,5 mm
Remaining thread length( b )	13 mm
Thread( M )	M6
Cylindrical diameter( d₀ )	11 mm
Undercutdiameter( d₁ )	13,5 mm
Colour washer	orange
Seismic-Approval	C1 / C2
System	FZP System
Amount	250 pcs
GTIN (EAN-Code)	4048962362060

ETA-approval
Min. panel thickness	8 mm
Embedment depth( h₁ )	6 mm
Total length( l )	18,5 mm
Installed anchor length( a )	8,5 mm
Remaining thread length( b )	10 mm
Thread( M )	M6
Cylindrical diameter( d₀ )	11 mm
Undercutdiameter( d₁ )	13,5 mm
Colour washer	red
Seismic-Approval	C1 / C2
System	FZP System
Amount	250 pcs
GTIN (EAN-Code)	4048962168471

ETA-approval
Min. panel thickness	10 mm
Embedment depth( h₁ )	8 mm
Total length( l )	22,5 mm
Installed anchor length( a )	10,5 mm
Remaining thread length( b )	12 mm
Thread( M )	M6
Cylindrical diameter( d₀ )	11 mm
Undercutdiameter( d₁ )	13,5 mm
Colour washer	yellow
Seismic-Approval	C1 / C2
System	FZP System
Amount	250 pcs
GTIN (EAN-Code)	4048962168495

ETA-approval
Min. panel thickness	12 mm
Embedment depth( h₁ )	10 mm
Total length( l )	21,5 mm
Installed anchor length( a )	12,5 mm
Remaining thread length( b )	9 mm
Thread( M )	M6
Cylindrical diameter( d₀ )	11 mm
Undercutdiameter( d₁ )	13,5 mm
Colour washer	green
Seismic-Approval	C1 / C2
System	FZP System
Amount	250 pcs
GTIN (EAN-Code)	4048962168518

Zykon panel anchors FZP II T PA

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje