The adjusting undercut anchor with a carbon fibre-reinforced sleeve for natural stone or artificial concrete panels.

Zykon panel anchors FZP II SO Carbon

The undercut anchor with a carbon fibre-reinforced plastic sleeve for a concealed stand-off installation solution for heavy façade panels out of natural stone or artificial concrete. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remainig wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses. A completely flat façade surface is created.

Variantes de productos

Download of image data

Variantes de productos

Atesti / izvješća testova

4 produkt varijanti

Min. panel thickness

Total length

Thread

Cylindrical diameter

Undercutdiameter

Amount

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 4 od 4 verzija

Advantages

Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.

Functionality

The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
The anchor is set through stand-off installation.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 4

ETA-approval
Min. panel thickness	20 mm
Total length ( l )	30 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Amount	250 pcs
GTIN (EAN-Code)	4048962111644

ETA-approval
Min. panel thickness	20 mm
Total length ( l )	33 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Amount	250 pcs
GTIN (EAN-Code)	4048962111651

ETA-approval
Min. panel thickness	30 mm
Total length ( l )	38 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Amount	250 pcs
GTIN (EAN-Code)	4048962260977

ETA-approval
Min. panel thickness	30 mm
Total length ( l )	43 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Amount	250 pcs
GTIN (EAN-Code)	4048962111668

Zykon panel anchors FZP II SO Carbon

Variantes de productos

Las ventajas / descripción del producto

Solicitud y aprobación

Instrucciones de montaje

Documentos para descargar