fischer Insulation fixing FID 90 K SB-card

Thermal bridge-free installation in insulation materials.

Broj artikla 512238
Top Features
  • No pre-drilling necessary in thin layers of plaster. This saves time.
  • With integrated bit mounting. This means that no special setting tool is required. This allows for a fast installation.

Opis proizvoda

The fischer insulation fixing FID is a fixing for mounting lightweight components in plastered and un-plastered insulation panels made of polystyrene and polyurethane. The fischer FID can be set either by hand, or with a cordless screwdriver. The special spiral thread taps itself in the insulating board. Components such as letter boxes, lamps or motion detectors can be mounted using a 6 mm screw.
Advantages
  • Since the anchor is set exclusively in the insulation itself, fixtures can be installed without thermal bridges.
  • The geometry of the FID allows for a simple installation in thin layers of plaster, without the need for pre-drilling, thus saving a stage of installation.
  • The FID 50 is used in thin insulating boards from 50mm. The FID 90 is used in thicker insulating boards, and can bear higher loads.
  • The bit mounting allows for setting with standard tools, thus allowing for a fast and economic installation.

Primjena i dozvola

Applications
To fix lightweight attachments on ETICS facades.
The application areas are ETICS facades made of:
  • Polystyrene
  • Mineral wool
  • Soft wood fibre
  • Alternative ecological insulation boards
Building materials
  • Non-plastered, pressure-resistant insulating boards
  • Plastered, pressure-resistant insulating boards
  • ETICS insulating boards
* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Uputa za sastavljanje

Functionality
  • The FID can be set in the insulating board with a cordless screwdriver or by hand.
  • For thick layers of plaster a pre-drilling (6 mm) is recommended.
  • The special spiral thread taps itself in the insulating board.
  • Fixtures are fixed with a 6 mm screw for the FID 90.
  • Water ingress in the insulation can be prevented by sealing the plug collar with a suitable sealant after successful pre-positioned installation.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture

Tehnički podaci

Tehnički podaci

Anchor length 90 [mm]
Min. bolt penetration 90 [mm]
Wood and chipboard screws 6.0 [mm]
Drive 6 mm / 6-kt
Max. bolt penetration 80 [mm]
Contents 2 x FID 90 K
Packaging Blister card
Amount 2 [pcs.]
GTIN (EAN-Code) 4048962115192

Dokumenti za preuzimanje

Dodatni dokumenti

sc93-delivery-2