Stand-off installation TherMax 10

Opis proizvoda

Advantages

The stand-off installation allows for the fixture to be adjusted to the exact position required, whereby pressure marks and damage to the ETICS are avoided.
The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing.
The glass-fibre-reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the need for any special tools.
Combining TherMax 10 with the universal plug UX provides a secure anchoring in the substrate.
Without UX plug direct mounting in wood substrate is possible after pre-drilling.

Dostupne verzije proizvoda

30 pronađeno verzija proizvoda

Verzija

Drill diameter

d₀

Drill hole depth

h₀

Max. thickness of non-bearing layer

Anchorage depth

h_ef

Pregledano 18 od 30 verzija

Primjena i dozvola

Applications

For the thermally separated fixing of:

Building materials

* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Uputa za sastavljanje

Functionality

The TherMax 10 system is suitable for pre-positioned installation.
The self-tapping, glass-fibre-reinforced cone cuts its own way through the plaster into the insulation during installation.
The anti-cold cone uses a thermal barrier to minimise heat losses.
Installation without any special tools.
For use in wood without plug, the wood (footnote below load table) as well as the plaster has to be pre-drilled: TherMax 10: d02 = 18 mm, h02 = 50 mm.
The range features fitting options with metric screws M6/8/10, sheet screws 6.3 mm, chipboard screws 6.0 mm or chipboard screws 4.5 - 5.5 mm when using an SX 5 expansion plug.

Dokumenti za preuzimanje

Dodatni dokumenti

Sastavni dijelovi i povezane kategorije

Sastavni dijelovi

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

Masonry drill bit Pointer M

The perfect drill bit for all perforated building materials

Drill diameter d₀	12 [mm]
Drill hole depth h₀	160 [mm]
Max. thickness of non-bearing layer e	80 - 100 [mm]
Anchorage depth h_ef	70 [mm]
Cover cap-Ø ADK	22 [mm]
Width across nut	13 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 12 x 70, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456927

Drill diameter d₀	12 [mm]
Drill hole depth h₀	180 [mm]
Max. thickness of non-bearing layer e	100 - 120 [mm]
Anchorage depth h_ef	70 [mm]
Cover cap-Ø ADK	22 [mm]
Width across nut	13 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 12 x 70, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456934

Drill diameter d₀	12 [mm]
Drill hole depth h₀	200 [mm]
Max. thickness of non-bearing layer e	120 - 140 [mm]
Anchorage depth h_ef	70 [mm]
Cover cap-Ø ADK	22 [mm]
Width across nut	13 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 12 x 70, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456941

Drill diameter d₀	12 [mm]
Drill hole depth h₀	220 [mm]
Max. thickness of non-bearing layer e	140 - 160 [mm]
Anchorage depth h_ef	70 [mm]
Cover cap-Ø ADK	22 [mm]
Width across nut	13 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 12 x 70, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456958

Drill diameter d₀	12 [mm]
Drill hole depth h₀	240 [mm]
Max. thickness of non-bearing layer e	160 - 180 [mm]
Anchorage depth h_ef	70 [mm]
Cover cap-Ø ADK	22 [mm]
Width across nut	13 [mm]
Chipboard / metric / sheet metal screw	4.5 - 6.0 / M 6 / 6.3
Contents	TherMax, UX 12 x 70, SX 5 x 25, cover cap
Packaging	Folding box
Amount	20 [pcs.]
GTIN (EAN-Code)	4006209456965

The thermally separated stand-off installation in external thermal insulation composite systems