Gas actuated fastening tool FGC 100

Quick and easy fastening in concrete and steel

The fischer gas actuated fastening tool FGC 100 is perfectly matched for the quick and easy fastening in concrete and steel. The 100 joules power ensures correct penetration into the working surface even for steel to steel applications.

Opis proizvoda

Advantages
  • The 100 joules power ensures correct penetration into the working surface even for steel to steel applications.
  • Easy nail depth adjustment switch to choose how to set the nails.
  • Long lifetime with service intervals after every 20,000 fixings under standard conditions.
  • Quick release system for a fast disassembling of the magazine and clearing of jammed nails.
  • Rechargeable battery with Li-Ion power: 8,000 fixings with one charge.
  • Battery-LED status.
  • A 10 minutes charge allows you to fix at least another 300 nails.
  • The FGC 100 is delivered in the practical XL-BOXX, which is fully compatible with the L-BOXX.

Dostupne verzije proizvoda


1 pronađeno verzija proizvoda

1 pronađeno verzija proizvoda

Verzija
Dimensions
Contents
Amount
GTIN (EAN-Code)
Broj artikla 553411

336 x 121 x 404 [mm]

1x fischer gas actuated fastening tool FGC 100, 1x Magazine FGC 100 – M26, 1x Battery charger BC 7,2V, 2x Li-Ion battery B 7.2V – 2.5 Ah, 1x Push bar, 2x Hex wrench, 1x XL-BOXX

1 [pcs.]

4048962365818

Pregledano 1 od 1 verzija
0

Primjena i dozvola

Applications
  • Drywall tracks
  • Electrical installations
  • Composite decks
  • Insulation systems
  • Light duty building construction applications
Building materials
  • Concrete
  • Sand-lime brick
  • Solid brick
  • Steel
* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.
Za detalje pogledajte odgovarajuće dokumente

Uputa za sastavljanje

Functionality
  • The fischer gas actuated fastening tool FGC 100 is suitable for a fast and reliable installation of e. g. drywall tracks and electrical connections in all directions on floors, walls and ceilings.
  • For optimum installation, the tool must be positioned perpendicularly to the working surface.
  • The attached stand gives support but can also be removed to drive nails in narrow areas.
  • The tool will operate within the temperature range of -7°C to +50°C.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Prikaži upute za sastavljanje u PDF-u

Dokumenti za preuzimanje

Sastavni dijelovi i povezane kategorije

sc93-delivery-2