Broj artikla 533376

fischer double-threaded screw STSI M10 x 181 mm A2, stainless steel A2

Top Features

Lower thread for steel
Upper metric thread
Incorporated EPDM gasket
Made of A2 stainless steel

Double-threaded screw for PV installations on corrugated panel roofs and steel load-bearing structures

Advantages

The STSI double-threaded screw is supplied pre-assembled with EPDM gasket, tightening nut and pair of nuts for connection to the MW or SSP brackets.
Quick installation because the roofing must not be removed during installation.
The integrated gasket enables better sealing against splashing rain.

STSI is the double-threaded screw in A2 stainless steel for fixing subframes of photovoltaic systems on corrugated panel or faux-barrel tile roofs to wooden load-bearing structure. Also suitable for installation on concrete with chemical injection mortar or in brick and cement structure with chemical injection mortar and FIS HK or FIS HN injection anchor sleeves.
Incorporated EPDM gasket for sealing against rain infiltration.

Properties

Steel beams and rails with panel thickness between 2 to 4 mm

Applications

Suitable for corrugated panel roof system:

SolarLight rail
SolarFish rail

STSI double-threaded screw fixing:

Directly on steel beams and rails after drilling the pilot hole

Building materials

Steel beams and rails with panel thickness between 2 to 4 mm

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

TUV - R 60154136

Functionality

Determine the length of the STSI double-threaded screw depending on the thickness of the load-bearing structure.
Determine the centre distance of the STSI double-threaded screws according to the snow and wind loads of the installation area and inclination of the roof.
Identify the position of the STSI double-threaded screws depending on the load-bearing structure and the layout of the installation.
Drill the support according to the diameter of the screw and the type of support.
Screw the STSI double-threaded screw into the structure by putting the EPDM rubber in contact with the roof.
Tighten the MU nut on the gasket to maintain waterproofness.
Fix the SSP or MW connection plate, adjusting its height using the MU nuts.

Mounting Strip 1 Picture

1 / 6

Pribor

MU F M10 A2

Diameter ( d )	8 mm
Shaft length ( L )	8,5 mm
Metric thread length	50 mm
Amount	10 pcs.
GTIN (EAN-Code)	8001132046456

fischer double-threaded screw STSI M10 x 181 mm A2, stainless steel A2

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Tehnički podaci

Dokumenti za preuzimanje