Liquid plugs and repair compounds for serious cases.

Fill&Fix injection fixing

Liquid plugs and repair compounds, ideal for repairing/strengthening drill holes or for fixing lightweight objects in difficult or dilapidated building materials as found in old buildings.

Produkt varijante

Download of image data

Produkt varijante

2 produkt varijanti

Contents

Scale unit

Colour

Language on label

Contents

Packaging

Pregledano 2 od 2 verzija

Advantages

The Fill&Fix injection fixing works for every drill hole size and building material. As a result, a number of applications can be completed with just one product.
Wood screws can be screwed directly into the hardened injection fixing. This allows a fast and simple installation.
The special formulation allows to reuse a screwhole after removing a screw. Thus, components can be reattached to the same point.
Fill&Fix can be sanded and painted, and is suitable for filling drill holes that are no longer needed prior to painting.

Applications

Repairing cracked or over-sized drill holes
Repairing broken furniture hinges etc.
Fixing lightweight objects in difficult or damaged building materials (old buildings)
Fixing lightweight objects in internal and UV-protected external areas

Building materials

Concrete
Vertically perforated brick
Hollow blocks made from lightweight concrete
Cavity floor slabs made from bricks and concrete
Wooden materials
Perforated sand-lime brick
Solid sand-lime brick
Natural stone with dense structure
Panel building materials
Aerated concrete
Solid panel made from gypsum
Solid brick made from lightweight concrete
Solid brick

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Functionality

Fill&Fix is a 2-component, solvent-free injection compound based on polyurethane. It is applied into the drill hole, where it foams lightly and sets quickly.
The compound hardens very quickly. If several drill holes are required: Pre-drill all drill holes and then fill them immediately in a single step.
The increase in volume during the setting process guarantees a secure hold, even in dilapidated or difficult building materials.
After approx. 2 minutes, screws, hooks, eye screws etc. with a diameter of up to 6 mm that are normally used in wood can be screwed into and removed from the set material without pre-drilling.
Use the perforated sleeves (included) for hollow and board building materials.

Mounting Strip 1 Picture

1 / 7

Mounting Strip 2 Picture

1 / 8

Contents	25 ml
Scale unit	70
Colour	beige
Language on label	DE
Contents	1 x Cartridge 25 ml 2 x Static mixer 4 x Anchor sleeves 2 x Extension tubes
Packaging	Blister card
Amount	1 pcs
GTIN (EAN-Code)	4006209510971

Contents	—
Scale unit	—
Colour	—
Language on label	—
Contents	6 x Static mixer
Packaging	—
Amount	6 pcs
GTIN (EAN-Code)	4048962300888

Fill&Fix injection fixing

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje