The high-performance concrete screw for absolute installation ease with special coating

Concrete screw UltraCut FBS II CP US

Name: Concrete screw UltraCut FBS II CP US
Brand: fischer

The fischer UltraCut FBS II CP US concrete screw has an innovative surface coating and is a powerful anchoring solution for fast installation and with a better corrosion behaviour of the coating. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The saw tooth geometry enables a quick and easy installation. No drill hole cleaning is required for installation in ceilings and floors. The expansion-free anchorage system enables low edge and axial clearances.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

19 produkt varijanti

Drill diameter

Min. drill hole depth for through fixings

Screw dimension

Nominal embedment depth / thickness of fixture

Legenda = Posjeduje atest— = Ne posjeduje atest

Više rezultata

Pregledano 18 od 19 verzija

Advantages

The innovative surface coating ensures additional protection against corrosion compared to the galvanized concrete screw FBS II (proved also through salt spray test over 2.000h).
The special saw tooth geometry enables fast cutting into the concrete.
The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
Cleaning the drilled hole is not necessary in case of vertical installation (in ceilings and floors) and when using hollow drills. The hole must be drilled 3x the drill hole diameter deeper for holes drilled in floors.
Approval-compliant adjustment allows the concrete screw to be unscrewed twice and the fixture to be underlaid or adjusted.
Three approved embedment depths allow the screws to be used in a wide range of applications, ensuring excellent flexibility.
The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.

Applications

Guard rails
Consoles/Base plates
Metal profiles
Steel constructions
Façades
Protection barriers

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Bricks of clay (EN771-1)
Solid sand-lime brick (EN771-2)
Perforated sand-lime brick (EN771-2)

Also suitable for:

Concrete C12/15
Solid building materials
Masonry with a dense structure

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-15/0352
ETA-20/0134
DoP No. 0185
DoP No. 0227
DoP No. 0311

Functionality

The UltraCut FBS II CP US is suitable for push-through installation.
Cleaning the drilled hole is not necessary for installation in ceilings and floors, and when using hollow drills. For drill holes in floors, you must drill 3x deeper than the drill diameter.
A tangential impact wrench with a suitable nut is recommended for installation (recommended: fischer FSS 18V).
If the screw head is in contact with the fixture, the correct installation of the screw is ensured (visual setting check).

Mounting Strip 1 Picture

1 / 7

Mounting Strip 2 Picture

1 / 3

Mounting Strip 3 Picture

1 / 2

ETA Certification Document

pdf, ETA-15/0352

European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete

izdato 05. 10. 2020.

DOP - Declaration of Performance

pdf, DoP No. 0227

Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)

izdato 19. 10. 2020.

ETA Certification Document

pdf, ETA-20/0134

European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry

izdato 14. 07. 2022.

DOP - Declaration of Performance

pdf, DoP No. 0311

Declaration of Performance for fischer concrete screw UltraCut FBS II (screw anchor for use in masonry)

izdato 28. 07. 2022.

DOP - Declaration of Performance

pdf, DoP No. 0185

Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)

izdato 27. 11. 2020.

Installation Instructions

pdf,

fischer UltraCut FBS II 8-14 GVZ/CP

Load Table

pdf,

Concrete screw UltraCut FBS II US/SK - Permissible loads for a single anchor in masonry for Push-through installation.

Load Table

pdf,

Concrete screw Ultracut FBS II US hexagon head with integral washer and FBS II SK countersunk head - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Marketing Documents

pdf,

UltraCut FBS II.

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Screw dimension ( d_s x l_s )	10.0 x 55 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	50 / 5 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture	—
Drive	TX40 / SW 13
Amount	50 pcs.
GTIN (EAN-Code)	4048962403183

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	80 mm
Screw dimension ( d_s x l_s )	10.0 x 70 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	50 / 20 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture ( h_nom3 / t_fix )	65 / 5 mm
Drive	TX40 / SW 13
Amount	50 pcs.
GTIN (EAN-Code)	4048962403190

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Screw dimension ( d_s x l_s )	10.0 x 80 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	50 / 30 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture ( h_nom3 / t_fix )	65 / 65 mm
Drive	TX40 / SW 13
Amount	50 pcs.
GTIN (EAN-Code)	4048962403206

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	100 mm
Screw dimension ( d_s x l_s )	10.0 x 90 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	50 / 40 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture ( h_nom3 / t_fix )	65 / 55 mm
Drive	TX40 / SW 13
Amount	50 pcs.
GTIN (EAN-Code)	4048962403213

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	110 mm
Screw dimension ( d_s x l_s )	10.0 x 100 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	50 / 50 mm
Nominal embedment depth / thickness of fixture ( h_nom2 / t_fix )	- mm
Nominal embedment depth / thickness of fixture ( h_nom3 / t_fix )	65 / 35 mm
Drive	TX40 / SW 13
Amount	50 pcs.
GTIN (EAN-Code)	4048962403220

Concrete screw UltraCut FBS II CP US

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Screw dimension ( d_s x l_s )	12.0 x 60 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	55 / 5 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture	—
Drive	SW 15
Amount	50 pcs.
GTIN (EAN-Code)	4048962403237

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Screw dimension ( d_s x l_s )	14.0 x 85 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	60 / 25 mm
Nominal embedment depth / thickness of fixture ( h_nom2 / t_fix )	75 / 10 mm
Nominal embedment depth / thickness of fixture	—
Drive	SW 17
Amount	20 pcs.
GTIN (EAN-Code)	4048962403312

ETA-approval
Drill diameter ( d₀ )	14 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Screw dimension ( d_s x l_s )	16.0 x 75 mm
Nominal embedment depth / thickness of fixture ( h_nom1 / t_fix )	65 / 10 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture	—
Drive	SW 21
Amount	20 pcs.
GTIN (EAN-Code)	4048962403336