Hammerset anchor EA Plus

Opis proizvoda

Advantages

The ETA-certified hammerset anchor EA Plus offers a high degree of safety in the non-cracked concrete.
The EA-ST PLUS setting tool guarantees a simple and quick installation.
The hammerset anchor with internal thread enables an easy pre-positioned installation.
The metric thread of the EA Plus allows the usage of all standard screws and therefore offers high flexibility.
The large range of internal thread diameters of 6 to 12 mm offers a wide range of different applications.
The EA Plus has an ETA assessment for multiple fixing. This ensures a safe installation of pipe routes or cable trays.

Dostupne verzije proizvoda

4 pronađeno verzija proizvoda

Verzija

Drill diameter

d₀

Min. drill hole depth for through fixings

h₂

Anchor length

Amount

Pregledano 4 od 4 verzija

Primjena i dozvola

Applications

Building materials

* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Dozvola/dopuštenje

Za detalje pogledajte odgovarajuće dokumente

Uputa za sastavljanje

Functionality

Position the hammerset anchor in the drill hole and drive in flush to the surface of the base material using the hammer.
The fischer setting tool EA-ST PLUS is then used to expand the sleeve against the drill hole wall by driving in the internal pin.
The setting tool must sit on the edge of the anchor to ensure correct expansion.

Dokumenti za preuzimanje

Dodatni dokumenti

Odobrenja

Naslov	Tip	Kreirano	Vrijedi do
ETA - European Technical Assessment (PDF, 478 KB) European Technical Assessment for fischer Hammerset anchor EA PLUS - Deformation-controlled expansion anchor made of galvanised steel for use in concrete for redundant non-structural systems	ETA-19/0169	05.04.2019.
DOP - Declaration of Performance (PDF, 977 KB) Declaration of Performance	DoP 0172	20.09.2019.

Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	25 [mm]
Anchor length l	25 [mm]
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962355017

Drill diameter d₀	10 [mm]
Min. drill hole depth for through fixings h₂	30 [mm]
Anchor length l	30 [mm]
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962355024

Drill diameter d₀	12 [mm]
Min. drill hole depth for through fixings h₂	40 [mm]
Anchor length l	40 [mm]
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962355031

Drill diameter d₀	15 [mm]
Min. drill hole depth for through fixings h₂	50 [mm]
Anchor length l	50 [mm]
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962355048

The cost-efficient and certified hammerset anchor for simple installation