The cost-efficient push-through anchor for multiple fixings.

Ceiling nail FDZ

The fischer ceiling nail FDZ is a zinc-plated steel push-through anchor. The FDZ is approved for multiple anchorings of non-structural systems in concrete. The fischer ceiling nail FDZ is ideal for anchoring metal profiles in drywall and for wire and nonious hangers for suspended ceilings in cracked concrete. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The ceiling nail is installed time-saving using a push-through installation and is hammered into the drill hole.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

2 produkt varijanti

Drill diameter

Anchor length

Max. fixture thickness

Min. drill hole depth without cleaning

Min. drill hole depth with cleaning

Head-ø

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 2 od 2 verzija

Applications

Drywall profiles
Wire and Nonius hangers
Ventilation systems
Slats
Metal profiles
Perforated tapes
Sub-structures made of metal

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems

Suitable for:

Concrete C12/15
Natural stone with dense structure

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-17/0737
DoP No. 0375

ETA Certification Document

pdf, ETA-17/0737

European Technical Assessment for fischer Ceiling anchor FDZ - Anchor for fastening redundant non-structural systems in concrete

izdato 10. 04. 2025.

DOP - Declaration of Performance

pdf, DoP No. 0375

Declaration of Performance for fischer Ceiling Anchor FDZ (Mechanical fastener for use in concrete)

izdato 19. 05. 2025.

Load Table

pdf,

Ceiling nail FDZ - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60

Hammer drill bit Quattric II S / Quattric II
95 Varijante

ETA-approval
Drill diameter ( d₀ )	6 mm
Anchor length ( l )	40 mm
Max. fixture thickness ( t _fix )	5 mm
Min. drill hole depth without cleaning ( h₁ )	47 mm
Min. drill hole depth with cleaning ( h₁ )	42 mm
Head-ø ( d_h )	15 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962396089

ETA-approval
Drill diameter ( d₀ )	6 mm
Anchor length ( l )	70 mm
Max. fixture thickness ( t _fix )	35 mm
Min. drill hole depth without cleaning ( h₁ )	77 mm
Min. drill hole depth with cleaning ( h₁ )	72 mm
Head-ø ( d_h )	15 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962396072

Ceiling nail FDZ

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje