The installation-friendly hammerset anchor for multiple fixings

Nail anchor FNA II M6 with thread and flange nut

Name: Nail anchor FNA II M6 with thread and flange nut
Brand: fischer

The fischer nail anchor FNA II M6 with thread and flange nut is made from zinc-plated, stainless, and highly corrosion-resistant steel. The nail anchor is primarily suitable for the anchoring of ventilation systems and mounting rails. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA II M6 is set in a few hammer blows in a time-saving push-through and pre-positioned installation. Torque-controlled tightening is not required. This saves time. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

7 produkt varijanti

Anchor length

Drill diameter

Min. drill hole depth for through fixings

Max. fixture thickness

Thread

Width across nut

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 7 od 7 verzija

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Concrete C12/15 to C50/60, cracked and non-cracked
For multi-point fixings of non-load-bearing systems

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-06/0175
DoP No. 0235
2006-CVB-R0559
2006-Efectis-R0560
2006-Efectis-R0561
GS 6.1/21-076-1

ETA Certification Document

pdf, ETA-06/0175

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete

izdato 02. 03. 2021.

DOP - Declaration of Performance

pdf, DoP No. 0235

Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)

izdato 16. 03. 2021.

Test report (fire protection)

pdf, 2006-CVB-R0559

fischer anchors, type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)

izdato 01. 11. 2006.

Test report (fire protection)

pdf, 2006-Efectis-R0560

fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 RVS A4)

izdato 01. 11. 2006.

Test report (fire protection)

pdf, 2006-Efectis-R0561

fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)

izdato 01. 11. 2006.

Test report (fire protection)

pdf, GS 6.1/21-076-1

Assessment of the load-bearing behaviour of ﬁscher nail anchors FNA II R and FNA II HCR under tension load and one-sided ﬁre loading according to the ZTV-ING-curve

izdato 05. 10. 2021.

Load Table

pdf,

Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Sistemske komponente

Slične proizviodne kategorije

ETA-approval
Anchor length ( l )	45 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441114

ETA-approval
Anchor length ( l )	55 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209460221

ETA-approval
Anchor length ( l )	50 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441091

ETA-approval
Anchor length ( l )	51 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M8
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441145

ETA-approval
Anchor length ( l )	50 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441121

Nail anchor FNA II M6 with thread and flange nut

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje

ETA-approval
Anchor length ( l )	41 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Max. fixture thickness	—
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441107