Heavy-duty anchor with triple expansion sleeve geometry for low edge clearances

Heavy-duty anchor TA M-T

Name: Heavy-duty anchor TA M-T
Brand: fischer

The fischer heavy-duty anchor TA M is made from zinc-plated steel for a time-saving pre-positioned installation. The optimised anchor geometry minimises setting energy and allows for use in really confined spaces. The heavy-duty anchor is ideal for the fixation of cantilevers, ladders, and steel constructions in non-cracked concrete. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial clearances. The detachable screw connection allows for surface-flush removal.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

3 produkt varijanti

Drill diameter

Min. drill hole depth for through fixings

Amount

Thread

Width across nut

Packaging

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 3 od 3 verzija

Applications

Steel constructions
Handrails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades

Building materials

Approved for:

Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-04/0003
DoP No. 0263

ETA Certification Document

pdf, ETA-04/0003

European Technical Assessment for fischer Heavy-duty anchor TA M, TA M S, TA M T - Mechanical fasteners for use in concrete

izdato 12. 06. 2018.

DOP - Declaration of Performance

pdf, DoP No. 0263

Declaration of Performance for fischer Heavy-duty anchor TA M, TA M S, TA M T (Mechanical anchor for use in concrete)

izdato 12. 01. 2021.

Load Table

pdf,

Heavy-duty anchor TA M-T - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Sistemske komponente

Hammer drill bit Quattric II S / Quattric II
92 Varijante

Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Amount	50 pcs.
ETA-approval
Thread ( M )	M8
Width across nut	13 mm
Packaging	Folding box
GTIN (EAN-Code)	4006209902684

Drill diameter ( d₀ )	15 mm
Min. drill hole depth for through fixings ( h₂ )	110 mm
Amount	25 pcs.
ETA-approval
Thread ( M )	M10
Width across nut	17 mm
Packaging	Folding box
GTIN (EAN-Code)	4006209902691

Drill diameter ( d₀ )	18 mm
Min. drill hole depth for through fixings ( h₂ )	120 mm
Amount	20 pcs.
ETA-approval
Thread ( M )	M12
Width across nut	19 mm
Packaging	Folding box
GTIN (EAN-Code)	4006209902707

Heavy-duty anchor TA M-T

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje