For highest demands. Powerful and flexible.

Bolt anchor FAZ II

The fischer bolt anchor FAZ II is a steel anchor for the highest requirements. Heavy loads can be secured in cracked concrete using the steel anchor. Thanks to its easy installation, the FAZ II can be used extremely flexibly. The tried-and-tested expansion clip safely introduces the loads into the concrete and enables top load-bearing capacity. The steel anchor is ideal for the anchoring of railings, cable trays and cantilevers, for example.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

14 produkt varijanti

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Max. usable length hef,stand./hef,min.

Thread

Width across nut

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 14 od 14 verzija

Advantages

According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time.
The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
The international approvals guarantee maximum safety and the best performance.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber concrete

Also suitable for:

Concrete C12/15
Concrete C80/95 (classification available)
Natural stone with dense structure

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-05/0069
DoP No. 0186
3023222
ESR-2948
Z-21.1-2145

Functionality

The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS anchor bolt setting tool.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-05/0069

European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete

izdato 24. 04. 2020.

DOP - Declaration of Performance

pdf, DoP No. 0186

Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)

izdato 15. 05. 2020.

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

ICC Certification

pdf, ESR-2948

ICC-ES Evaluation Report

Vrijedi od 01. 01. 2024.
do 31. 01. 2026.

DIBt, National German Certification

pdf, Z-21.1-2145

General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete

Vrijedi od 12. 07. 2022.
do 12. 07. 2027.

Load Table

pdf,

Bolt anchor FAZ II - Permissible loads of a single anchor in normal concrete of strength class C20/25

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 20 mm
Thread ( ø x length )	M8 x 38 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4006209948712

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Anchor length ( l )	95 mm
Max. usable length hef,stand./hef,min. ( t_fix )	30 / 40 mm
Thread ( ø x length )	M8 x 58 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4006209948774

ETA-approval
ICC-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	105 mm
Anchor length ( l )	115 mm
Max. usable length hef,stand./hef,min. ( t_fix )	50 / 60 mm
Thread ( ø x length )	M8 x 78 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4006209948781

ETA-approval
ICC-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Anchor length ( l )	95 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 30 mm
Thread ( ø x length )	M10 x 53 mm
Width across nut	17 mm
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4006209949818

ETA-approval
ICC-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Anchor length ( l )	105 mm
Max. usable length hef,stand./hef,min. ( t_fix )	20 / 40 mm
Thread ( ø x length )	M10 x 63 mm
Width across nut	17 mm
Packaging	Folding box
Amount	25 pcs
GTIN (EAN-Code)	4006209949825

Bolt anchor FAZ II

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje