For highest demands. Powerful and flexible.

Bolt anchor FAZ II GS with large washer

Name: Bolt anchor FAZ II GS with large washer
Brand: fischer

The fischer bolt anchor FAZ II GS with its large washer is the ideal bolt anchor for the highest requirements. With the steel anchor made from zinc-plated and stainless steel, heavy loads are secured in cracked and non-cracked concrete. The steel anchor with the large washer is perfect for securing steel components with slots, for example. Thanks to the two anchorage depths and the easy assembly process, the FAZ II GS can be used particularly flexibly. The tried-and-tested expansion clip introduces the loads into the concrete particularly safely, and enables a top load-bearing capacity.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

21 produkt varijanti

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Max. usable length hef,stand./hef,min.

Thread

Width across nut

Legenda = Posjeduje atest— = Ne posjeduje atest

Više rezultata

Pregledano 18 od 21 verzija

Advantages

The FAZ II GS with 8, 10 and 12 mm diameters are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort.
The significantly larger outer diameter of the washers for FAZ II 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
The pre-fitted washer ensures a fast installation.
Furthermore, the FAZ II GS bolt anchor offers all of the benefits of the FAZ II.

Applications

Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber concrete

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-05/0069
DoP No. 0186
Z-21.1-2145
3023222

Functionality

The FAZ II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-05/0069

European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete

izdato 24. 04. 2020.

DOP - Declaration of Performance

pdf, DoP No. 0186

Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)

izdato 15. 05. 2020.

DIBt, National German Certification

pdf, Z-21.1-2145

General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete

Vrijedi od 12. 07. 2022.
do 12. 07. 2027.

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

Load Table

pdf,

Bolt anchor FAZ II - Permissible loads of a single anchor in normal concrete of strength class C20/25

Sistemske komponente

Hammer drill bit Quattric II S / Quattric II
92 Varijante

Slične proizviodne kategorije

ETA-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 20 mm
Thread ( ø x length )	M8 x 38 mm
Width across nut	13 mm
Washer (outer diameter x thickness)	22 x 2.5 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209948729

ETA-approval
Seismic-Approval	C1
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Anchor length ( l )	95 mm
Max. usable length hef,stand./hef,min. ( t_fix )	30 / 40 mm
Thread ( ø x length )	M8 x 58 mm
Width across nut	13 mm
Washer (outer diameter x thickness)	22 x 2.5 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209961896

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Anchor length ( l )	95 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 30 mm
Thread ( ø x length )	M10 x 53 mm
Width across nut	17 mm
Washer (outer diameter x thickness)	25 x 3 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209962916

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	85 mm
Anchor length ( l )	95 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 30 mm
Thread ( ø x length )	M10 x 53 mm
Width across nut	17 mm
Washer (outer diameter x thickness)	25 x 3 mm
Packaging	—
Amount	1 pcs.
GTIN (EAN-Code)	4006209924419

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	10 mm
Min. drill hole depth for through fixings ( h₂ )	105 mm
Anchor length ( l )	115 mm
Max. usable length hef,stand./hef,min. ( t_fix )	30 / 50 mm
Thread ( ø x length )	M10 x 73 mm
Width across nut	17 mm
Washer (outer diameter x thickness)	25 x 3 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209962978

Bolt anchor FAZ II GS with large washer

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje